NEWS CENTER
16
2021-07
Numerical control technology originated from the needs of aviation industry, the late 1940s, the United States a helicopter company proposed. The initial idea of CNC machine tools, the United States in 1952 Massachusetts Institute of Technology developed...
16
2021-07
Numerical control machining has the following advantages...
16
2021-07
CNC machining center is composed of mechanical equipment and CNC system is suitable for processing complex parts of high efficiency automatic machine tools. CNC machining center is one of the most widely used CNC machine tools in the world. Its comprehens...
16
2021-07
How to improve the processing efficiency of dense parts processing plant...
16
2021-07
When the workpiece is clamped, the correct clamping point should be selected first, and then the appropriate clamping force should be selected according to the position of the clamping point. Therefore, as far as possible to make the clamping point and su...
16
2021-07
General lathe is a horizontal lathe that can process various types of workpiece such as shaft, disk, ring and so on. It is often used to process the inner and outer rotating surface, end face and various internal and external threads of the workpiece. It...
16
2021-07
The material of conductive slip ring requires high mechanical strength. It is not only a good conductor of electricity, but also has corrosion resistance. When sliding in contact with the brush, it must have wear resistance and stable sliding contact char...
16
2021-07
Rolling bearing wear or improper adjustment, resulting in excessive movement resistance. This fault phenomenon is also usually shown in the size of a few wire within the range of irregular changes. The inspection can be carried out by the position deviati...